Since TXT-1 wheels are becoming very hard to find, how about strengthening your stock Clodbuster wheels to the TXT-spec drive pins? These solid plastic adapters fit over the stock Clodbuster drive pins and are the same diameter as the larger, stock TXT wheels. Sold in sets of 22, this kit will allow you to upgrade a complete set of 4 wheels.
Installation guide: 1. Add a small amount of adhesive around the stock Clodbuster drive pin. Shoe-Goo, E6000, or even CA glue will work. 2. Tap the adapter over the Clodbuster drive pin, seating it into the adhesive on the wheel. Add a final drop of glue in the center of the adapter, bonding the top of it to the stock drive pin. 3. Repeat, a lot... 4. Tap drive hub on to wheel & install on truck!
Notes: 1. These adapters come with a "dull" side and a "shiny" side. Ensure that the "dull" side faces the backside of the wheel. The shiny side will be facing towards you. 2. If you are not using TXT drive hubs, you will need to enlarge the drive pin holes in your stock Clodbuster drive hubs to fit these larger drive pins using a 19/64" drill bit.
Shipping Charges: Our standard shipping charge is a flat $5.00 for this item.